Apache CGI Scripts on windows.

CGI scripts on apache installed on windows didn't work. It is because of the first line of the .cgi files.

Normally first line of .cgi file reads as #!/usr/bin/perl and on windows apache uses this first line to find the appropriate perl exe to run the script. This default behavior can be overridden by using ScriptInterpreterSource directive of apache.
Adding "ScriptInterpreterSource Registry-String" directive to apache httpd.conf file, we are telling apache to ignore the first line #!..... and instead look in to the registry for the perl exe to run the script.

If moving #!/usr/bin/perl to C:\Perl\bin\perl.exe [Correct perl.exe installation path.] works fine which conclude that ScriptInterpreterSource directive is not working properly.

Solution to the failure of apache .cgi scripts on windows is:

Edit httpd.conf file and add the line:
ScriptInterpreterSource Registry-String

Add the following key in the
registry.

\HKEY_CLASSES_ROOT\.cgi\Shell\ExecCGI\Command.

Default value should be the location of your Perl executable.
[ex. C:\Perl\bin\perl.exe -T].




cheers, make world open...

Unhappy lots...

By the law of average and human nature, every organization has at least 10% people who are unhappy.

I believe you don't want to end up being a part of that 10%.

One has to remember one can't have it all at the same time. Decide your priorities and just concentrate on the way you want to shape your career.

Different people have different priorities. For some its rank, for some its recruitment, for some its location and for some its fun. These personal priorities are what make some people leave great organizations, reject Microsoft, or choose rank 15 over 5. You do not have to justify your priorities to anyone, but make sure that YOU are sure. Concentrate a little on what is going to make you truly happy.

Just remember that you can't have it all. Decide your priorities and work on your list of workplaces up to the point where you are not second guessing yourself. If living at some particular place had been a life long dream, go ahead! If Silicon Valley is the thing for you, apply for the same there.

I believe it is really tough to say goodbye to your workplace where you had spent most of your time during the stay there.

With my going away being certain, and last day at work looming in front of me, its become extremely difficult to act like I care and want to perform. I was just going through the motions, but I was not sure how long...

Well that kept me tied to some of the basic and fundamental apprehensions which i was about to leave/carry on my shoulder. There was more lot of the element of confusion rather than sanity of the decision. I was really scared to answer some of the straight forward queries and eventually avoided most of them. Most of my WHY's were un-answered and it is still open...

Courtesy being $udha for inputs..

Google packs StarOffice

Google packs StarOffice to google pack.

Some more info here...

Getting more wide user base for office suite and eventually promoting OpenOffice.org.

Subversion, Apache(httpd), ViewCVS windows XP setup and configuration continued.....

We can have browser support for subversion repository without viewCVS. It is obvious we will miss most of the features provided by viewcvs but we can have repository browsing and network access of repository over HTTP protocol supported by subversion. To achieve this we need to have apache module (mod_dav_svn) installed at the time of installation of subversion and have to do some configuration changes to httpd.conf (Apache configuration) file.

Referring previous post...

During the installation of subversion make sure to check the option to install the apache module. Subversion installation will modify the Apache configuratuion to load the modules (dav_svn_module & authz_svn_module) with a similar entry like:

LoadModule dav_svn_module "C:/Program Files/Subversion/bin/mod_dav_svn.so"
LoadModule authz_svn_module "C:/Program Files/Subversion/bin/mod_authz_svn.so"

These two modules will handle the Subversion requests. We have to ensure that the LoadModule section of httpd.conf should have an entry of apache module dav_svn.so before mod_dav_svn.so & authz_svn_module.so.

We need to edit the httpd.conf file to point Apache to the subversion repository.
Add the following lines to the end of the httpd.conf file.


Subversion repositories are residing in C:/opt. We can have any number of repository in C:/opt and all will be available to Apache.

** We can browse repository with the URL as http://localhost/svn/svn-root
where svn-root is one of the repository in C:/opt. Localhost can be replaced by hostname OR IP address of the installed Apache box when one wants to browse repository over network.

** we can access the repository using SVN client as
svn list http://localhost/svn/svn-root


cheers, make world open...

Apple Introduces Safari for windows

Enjoy... Safari on windows. 

Claimed to be the fastest browser among the existing ones's. I am experiencing it and definitely cherish this as long as Apple provides Safari as a free download for windows.

Get safari 3 Beta... and experience the power of Apple and feel of Mac on windows.

Subversion, Apache(httpd), ViewCVS windows XP setup and configuration

Subversion, Apache HTTP server and viewcvs goes hand in gloves if one wants to run subversion as a version control(source control) for any production environment.

Followed the following steps to configure all three together.

1. Installed subversion1.4.3 from http://subvsersion.tigris.org version as svn-1.4.3-setup.exe

2. Installed the activestate python from ftp.activestate.com version as ActivePython-2.5.0.0-win32-x86.msi

3. Installed svn-python binding for python2.5 and subversion1.4.3 from http://subversion.tigris.org version as svn-python-1.4.3.win32-py2.5.exe

• One has to be very specific about the python, subversion and svn-python bindings. Ensure that the svn python binding versions should be same as that of subversion and python installed.
  

4. Test that the python shell can load svn-python bindings

• launch C:/Python25/python.exe
• from python shell enter : import svn.repos , it should not give any error trace.
• exit python shell.

5. Got viewCVS from http://viewcvs.sourceforge.net version as viewvc-1.0.4.zip.

• Unzipped viewvc-1.0.14.zip and renamed viewvc-1.0.4/viewvc-install as viewvc-1.0.4/viewvc-install.py and double-clicked it. This will ask some simple configuration query, i preferred default.

6. Edited C:/Program Files/viewvc-1.0.4/viewvc.conf

• commented # cvs_roots = cvs: /home/cvsroot
• Modified svnroots line as svn_roots = svn-root: c:/opt/svn-root , this is because i am having one svn repo named "svn-root" in C:/opt directory.
• Modified root_parents line as root_parents = C:/opt : svn and removed ',' from the end of line.
• Modified default_root line as default_root = svn-root

7. Test the viewcvs and subversion configuration and integration

• Through command line run standalone.py -g from C:/Program Files/viewvc-1.0.4/bin/ location.
  
• It will allow one to browse the repository with the default browser and if it works then only we can go further to integrate viewcvs with apache.

8. Installed apache httpd from http://www.apache.org as version apache_2.0.59-win32-x86-no_ssl.msi

• Subversion win32 binaries are compiled for apache2.0.x and will not work with apache2.2.x.
  
• "dav_svn_module in file /modules/mod_dav_svn.so is garbled" - perhaps this is not an apache module DSO ? This is the error one would get if tries to run apache-2.2.x with win32 subversion.

9. Edited httpd.conf file

• Search for ScriptAlias in httpd.conf file and add one more line below all the ScriptAlias as ScriptAlias /viewcvs "C:/Program Files/viewvc-1.0.4/bin/cgi/viewvc.cgi"
• Restart apache httpd server
• Now, one can browse the repository.

10. One need GNU diffutils installed and in the PATH to enable the viewcvs feature of diff between two revisions. Get GNU diffutil from this Link...

cheers, make world open.

Gentoo on VMware in Fedora Core 6

Successfully installed Gentoo on real hardware and then thought of trying same installation on VMware server 1.0.1.
Religiously followed the Gentoo Handbook page for both the installation.
All went well for real hardware installation but on VMware it failed to boot from hard disk after installation with an error message saying that /dev/sda3 is not a valid block device.

Gentoo HOWTO wiki page helped me to identify the problem and gave solution as well.
VMware seems to be using different driver for scsi devices and so /dev/sda3 is not able to mount as root partition hence stopping kernel from booting successfully.

I recompiled the kernel with some more addition to the kernel configuration
$ genkernel --menuconfig --no-mrproper --no-clean all
above command will allow you to keep all your existing configuration and add some more configuration parameters.

Earlier my kernel on VMware gentoo had Modular support for scsi_generic and Kernel support for scsi_disk. Modified the kernel configuration and added these two modules as a built in Kernel support. Made sure that the menuconfig windows has <*> before SCSI disk support and SCSI generic support.
These options can be found here at menuconfig windows...
Device Drivers -->
SCSI device support -->
<*> SCSI disk support
....
....
<*> SCSI generic support

This re-compiled kernel did the magic for me. Gentoo on VMware boots great from hard disk.

Network also had an issue as VMware needs AMD PCnet32 PCI support. Solution is to either build kernel with AMD PCnet32 PCI support OR load the kernel module pcnet32 by default at boot time.

cheer, make world open...

Technorati Profile

technorati claim

Technorati Profile

Reporting from BarCampBangalore3

Bang!!!
Again this time barcampbangalore3 started with a bang with lot of topics and obviously lots... n lots of bright people. I was rite in my earlier post to learn more about social computing.
Attended couple of sessions on ICT for society, foss in governance and still more to come...

First session in society hall is about ICT for society...

error C2065: 'INVALID_FILE_ATTRIBUTES' : undeclared identifier Error executing cl.exe.

Cygwin based compilation of opensource components which needs platform sdk 2003 toolkit breaks with the above titled error message.

This failure is basically because of missing macro $define INVALID_FILE_ATTIBUTES ((DWORD) -1)
in winBase.h of platform sdk 2003 installation.

Solution:
1. Check the "INCLUDE" environmental variable and ensure that the platform sdk is part of this variable.
INCLUDE=C:\Program Files\Microsoft Platfform SDK\Include\.

2. If platform sdk is part of include variable then look for the macro $define INVALID_FILE_ATTIBUTES ((DWORD) -1) in C:\Program Files\Microsoft Platform SDK\include\winBase.h and if one can see the macro in this file then this is the time to get the latest version of Platform sdk installed.

Above steps will resolve the title issue.

cheers, make world open.

BarCamp Bangalore 3

BarCamp Bangalore third edition is scheduled for March 31 and April 1 2007. Looking forward to learn some interesting development in the current technologies trends.

BarCamp Bangalore [BCB3] themes are really interesting - Internet, Mobiles and the impact of technology on our society and our lives.

An Unconference for you and by you... great catch...
Register Here...

cheers, make world open...

Vote for OOoCon 2007 in India

We should come forward to make this happen and scratch a more visible line on OpenSource map for India.
Please vote.

More Information....
cheers,
make world open...

Failure in moz while Building OpenOffice m196 on fc6 with gcc 4.1.x

Failure in moz while Building OpenOffice m196 on fc6 with gcc 4.1.x.

Error trace is :
mimemult.cpp:55: warning: missing braces around initializer for ‘MimeContainerClass’
mimemult.cpp:55: warning: missing braces around initializer for ‘MimeObjectClass’
mimeeobj.h:57: error: previous declaration of ‘MimeExternalObjectClass mimeExternalObjectClass’ with ‘C++’ linkage
mimemult.cpp:76: error: conflicts with new declaration with ‘C’ linkage
gmake[4]: *** [mimemult.o] Error 1
gmake[4]: Leaving directory `/home/vijay/ooo_SRC680_m196_src/moz/unxlngi6.pro/misc/build/mozilla/mailnews/mime/src'
gmake[3]: *** [libs] Error 2
gmake[3]: Leaving directory `/home/vijay/ooo_SRC680_m196_src/moz/unxlngi6.pro/misc/build/mozilla/mailnews/mime'
gmake[2]: *** [libs] Error 2
gmake[2]: Leaving directory `/home/vijay/ooo_SRC680_m196_src/moz/unxlngi6.pro/misc/build/mozilla/mailnews'
gmake[1]: *** [tier_97] Error 2
gmake[1]: Leaving directory `/home/vijay/ooo_SRC680_m196_src/moz/unxlngi6.pro/misc/build/mozilla'
make: *** [default] Error 2
dmake: Error code 2, while making './unxlngi6.pro/misc/build/so_built_ooo_mozab'
'---* tg_merge.mk *---'
ERROR: Error 65280 occurred while making /home/vijay/ooo_SRC680_m196_src/moz

The problem is with the mozilla 1.7.5 source which is fixed in mozilla 1.8.
http://qa.openoffice.org/issues/show_bug.cgi?id=66906
Link shows the patch id=39575 which when applied fixes the broken build.

cheers, make world open.

From BarCamp Bangalore

Sharing space with folks here at barcamp bangalore 2.0 at thoughtworks india and planning for the sessions ahead. Having more scoop of enthusiasm or may be i did not want to miss this golden opportunity , i came a lot early and became the first one to put up my name here to register.
But.. uhhhh i am not the only one who is so excited about the event. I see a lot of folks here already as early as 8.30 am in the morning.
Will come back and put up more interesting stuff here....

How to enable Wireless Lan on [wifi] FC-6 .

Bingo!!! Fedora Core 6 comes with build-in support for ipw2200 drivers and ieee80211 modules. The FC6 kernel 2.6.18-1.2849.fc6 includes version 1.1.2 of the ipw2200 driver. So one needn't worry about the wifi on FC6 and don't need to use windows native driver using ndiswrapper.
FC6 needs only ipw2200-firmware [firmware v3.0], which is not shipped with FC6 because firmware is proprietary.

*** Steps to enable wifi on IBM T43

1. Download ipw2200-fw-3.0.tgz from
http://ipw2200.sourceforge.net/firmware.php

2. Unarchive ipw2200-fw to /lib/firmware

3. reload ipw2200 $/sbin/modprobe -r ipw2200
restart ipw2200 $/sbin/modprobe ipw2200
OR reboot the machine.

Look for the dmesg log as root
$ dmesg | grep ipw2200
Output:

ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.2.0dmq
ipw2200: Copyright(c) 2003-2006 Intel Corporation
ipw2200: Detected Intel PRO/Wireless 2200BG Network Connection
ipw2200: Detected geography ZZM (11 802.11bg channels, 0 802.11a channels)

$system-config-network and configure the
wireless card.



*** Steps to enable wifi on HP nx6110 using ndiswrapper on fedora core 6.

1. Ensure livna repo is added to the yum repos.

2. $yum install ipw2200-firmware

3. $yum install ndiswrapper

4. $yum install cabextract
5. Download HP windows native driver SP30290.exe

6. Unpack the SP30290.exe to some directory. To do so run
$ cabextract SP30290.exe

7. From the directory where the SP30290.exe file is extracted. As super user(root) run
$ /usr/sbin/ndiswrapper -i bcmwl5a.inf

8. $ /usr/sbin/ndiswrapper -m
It will add an alias to /etc/modprobe.conf.
Alias means it will add a line "alias wlan0 ndiswrapper" at the end of /etc/modprobe.conf .
If above command fails, manually add "alias wlan0 ndiswrapper" to /etc/modprobe.conf.

9. Blacklist bcm43xx,
To do this add line blacklist bcm43xx to the end of file /etc/modprobe.d/blacklist .

10. Now you can reboot to have it activated,
or you can run
$ depmod -a
$ modprobe ndiswrapper

Use the System -> Administration -> Network application to create a new device for the wlan0 ndiswrapper device and configure as per the options there.

cheers,
make world open.

VMware server on fedora core 6

Vmware server on fedora core 6 is having problem while configuring it with vmware-config.pl. The error trace is:

/tmp/vmware-config1/vmnet-only/procfs.c:33:26: error: linux/config.h: No such file or directory
make[2]: *** [/tmp/vmware-config1/vmnet-only/procfs.o] Error 1
make[1]: *** [_module_/tmp/vmware-config1/vmnet-only] Error 2
make[1]: Leaving directory `/usr/src/kernels/2.6.18-1.2798.fc6-i686'
make: *** [vmnet.ko] Error 2
make: Leaving directory `/tmp/vmware-config1/vmnet-only'
Unable to build the vmnet module.

The problem as evident from the trace is because of the missing config.h file at this location

/usr/src/kernels/2.6.18-1.2798.fc6-i686/include/linux/config.h

Fix for the problem is to create an empty config.h file at this location /usr/src/kernels/2.6.18-1.2798.fc6-i686/include/linux/.

$ touch /usr/src/kernels/2.6.18-1.2798.fc6-i686/include/linux/config.h
will do the magic.

cheers, make world open...

Issue building subversion 1.3.0 on sles9

Building subversion with the ssl support on sles9 box fails at the time of configure itself with the following error messages.
$./configure --with-ssl

.......
.....
...
checking for library containing RSA_new... not found
configure: error: could not find library containing RSA_new
configure failed for neon

The problem is either with the installed location of the openssl library or it might be possible that openssl-devel is not installed on the box.

Look for the openssl-devel rpm and if it is installed in the system then one have to identify the exact location of the openssl library and can pass the same to the configure script like...
$./configure --with-ssl --with-libs=/usr/local/ssl ...

Problem resolved. :-)

cheers, make world open.

Xorg startx problem

The problem is with starting the X windows on the FC-4 box. When doing "startx" at the command prompt with root user, "startx" is starting successful session of X window. It is failing for all the user other than root with the following error message.

Cannot move old log file ("/var/log/Xorg.0.log" to "/var/log/Xorg.0.log.old"
Please consult the The X.Org Foundation support at
http://wiki.X.Org for help.

The problem is with the permissions on /usr/X11R6/bin/Xorg

Doing this $ chmod u+s /usr/X11R6/bin/Xorg
and confirming /usr/X11R6/bin/Xorg file
owner as root.root will do the trick.

Now... X windows is running great.

cheers,
make world open...

Pishing.... online identity theft!!!

TBD